ZenWifi XD5 LAN port

[yeowkm]

i bought a pair of XD5 zenwifi router for my home.

when i setup the main unit, i noticed that the LAN port is showing public IP adderss when i connecte my laptop.

I have already connected WAN/LAN port to my telco ONT. Internet is working but LAN port still show WAN IP instead of the LAN subnet of 192.168.50.xx/24.

is there any settings for the LAN port?

WIFI clients is working fine using 192.168.50.xx/24 ip address. 

[jzchen]

It should work normally as a LAN port.

I was confused where you were seeing the WAN IP on the XD5 LAN port?  So if you type that WAN IP into a web browser does it go to the XD5 log in page?  It's supposed to be 192.168.50.1 unless you changed it.

[yeowkm]

yes, the behaviour is strange. i did not try typing the WAN IP into web browser.

LAN port getting public ip address from my ISP. 

i did not change the setting, except change from 192.168.50.1 to 192.168.1.1 for router main login page.

[jzchen]

Ahh.  So you changed the XD5 local IP to 192.168.1.1.  If so please try to change/verify the LAN DHCP range to/is 192.168.1.2 - 192.168.1.254.  Your devices, both ethernet and WiFi, should get assigned IPs in the form 192.168.1.xxx .  (At least this is to my understanding good practice).  Please follow up afterwards if the LAN port works properly, and if your laptop gets an IP of 192.168.1.xxx.

[yeowkm]

WIFI LAN is working as expected but ethernet LAN port is not working as LAN.

don't see anything wrong with the LAN IP settings. 

[yeowkm]

Issue is because i set the LAN port VID to 10. by default my XD5 did work using default setting. (No  Internet when i connect using default settings. this is due to some requirement from our ISP.

so i change WAN port and LAN port to VID 10. after removing the settings for LAN port. it works normally as LAN.