I'm not certain this is a router problem, but Lenovo and Ubiquiti have failed me.I have the AX3000 hooked up by cable to a Ubiquiti UPA-AC-LR cabled to the Asus and Lenovo PC connected by wifi. Both have worked perfectly with my Asus for 18 mo. In t...
I am using Firmware Version: 3.0.0.4.386_52332 on my WIFI rtax55 router and would like to know if IGMP can be turned off or filtered on ports? IGMP uses IP 224.0.0.x.
When will 4K-QAM be available, currently only 1K-QAM (mcs11) is available.
Kudos to @SpaceAntelope for guiding me in the right direction. I also did some testing with some changes and found the following. ASUS' firmware is poop. Any deviation will make 6GHZ not work!1. Download firmware 3.0.0.4.388_23759 for your version,...
I've 4 BT8s configured in router mode and connected with an ethernet backhaul. My iPhone 14pro and my Mac (M2) frequently (daily) enter in a loop of connection and disconnection from Wifi (every 2-3 seconds). This happens also if I'm in the same room...
I have AIMesh system at home:RT-BE88U as a master ( 3.0.0.6.102_37103 firmware - the latest at the moment)RT-AX88U as a node ( 3.0.0.4.388_2422 firmware1 - the latest at the moment)Connected with 1Gbit network cable.Both running 2.4 and 5 GHz network...
Hello dear ASUS support,I need your help. I have an Asus GT AC5300 ROUTER for many years, with DDNS: dobson7.asuscomm.com on IP address: 87.227.179.231. But now I changed my ISP to a new IP address: 84.43.222.221. I need to use my DDNS again: dobson7...
I'm trying to update the firmware in my EBP15 to Firmware version 3.0.7.18 and I get the following error.Image file CRC check fail. Please try again ...I had no problems updating to firmware version 3.0.7.5. The SHA256 check matches.
I am using a TUF AX3000 router and this problem occurs with router app on Iphone. When I connect to the router via WLAN (internal connection), everything works normally, including the speed. However, the problem occurs when I connect externally (eith...
Twice since I set up the three BT10's, the 2ghz has dropped from the mlo interface and all my 2ghz iOt devices get connected back to the main hub vs the node that may be 40feet closer to the device. If I reboot the system everything goes back to nor...
