This widget could not be displayed.
This widget could not be displayed.
cancel
Showing results for 
Search instead for 
Did you mean: 

XT9 Firmware Update broke my setup.

wdcossey
Visitor

I have two XT9 in a simple Access Point mode, after the latest update (on the 13th) my network is a mess.

1. The main AP needed a reboot and eventually came back to life.

2. The second AP was stuck on the old firmware and couldn't connect.

3. Updating it to the new firmware it no longer connects to the primary.

4. Reset multiple times, nothing.

5. Run a cable and it works.

6. Unplug the cable, nothing again, stuck on blinking blue lights.

I can't have the cable plugged in permanently, these devices are several meters away from each other and I can't run cable, hence why I chose mesh.

Can I rollback this busted a$$ firmware so I can get my network operational again!

1 REPLY 1

wdcossey
Visitor

Saw this and decided to manually rollback by firmware to the previous version (2024/11/05) on all nodes, back up and running.