Kudos to @SpaceAntelope for guiding me in the right direction. I also did some testing with some changes and found the following. ASUS' firmware is poop. Any deviation will make 6GHZ not work!1. Download firmware 3.0.0.4.388_23759 for your version,...
I've 4 BT8s configured in router mode and connected with an ethernet backhaul. My iPhone 14pro and my Mac (M2) frequently (daily) enter in a loop of connection and disconnection from Wifi (every 2-3 seconds). This happens also if I'm in the same room...
I have AIMesh system at home:RT-BE88U as a master ( 3.0.0.6.102_37103 firmware - the latest at the moment)RT-AX88U as a node ( 3.0.0.4.388_2422 firmware1 - the latest at the moment)Connected with 1Gbit network cable.Both running 2.4 and 5 GHz network...
Hello dear ASUS support,I need your help. I have an Asus GT AC5300 ROUTER for many years, with DDNS: dobson7.asuscomm.com on IP address: 87.227.179.231. But now I changed my ISP to a new IP address: 84.43.222.221. I need to use my DDNS again: dobson7...
I'm trying to update the firmware in my EBP15 to Firmware version 3.0.7.18 and I get the following error.Image file CRC check fail. Please try again ...I had no problems updating to firmware version 3.0.7.5. The SHA256 check matches.
I am using a TUF AX3000 router and this problem occurs with router app on Iphone. When I connect to the router via WLAN (internal connection), everything works normally, including the speed. However, the problem occurs when I connect externally (eith...
Twice since I set up the three BT10's, the 2ghz has dropped from the mlo interface and all my 2ghz iOt devices get connected back to the main hub vs the node that may be 40feet closer to the device. If I reboot the system everything goes back to nor...
Posting in case anyone from Asus monitors the forum.In the RT-AX86U router interface, under USB Application > Network Place (also in FTP Share) the sequential order of accounts listed for USB access isn't stable anymore, as of this update.The top acc...
Hello there,Can anyone help me please? I already posted here a similar question, but get no relevant reply or instructions.I would like to move a robot vacuum cleaner from the regular 2.4GHz band to a 2.4GHz IoT network. Can anyone tell me if this va...
Hi Alli have recently purchased a Aesus Ax1800 XD400 plus.it has been working fine, but quite recently one of the nodes has a constant Blue Light(picture attached).i have tried everything from rest to re adding it to the mesh system but it just dosen...
