Hello,I am using an Asus ZenWiFi AX mesh system with Verizon FiOS (300/300 plan). The router is on the latest firmware (3.0.0.4.388_24753).When I connect directly to the FiOS ONT with a laptop, I get 300 Mbps down / 300 Mbps up.When I use the Asus ro...
I just bought the BT8/BE1400 (2-Pk) and after setting up, I found that no devices are connected to the 6GHz (I have a couple of WiFi 6e devices, MBA M4 and iPad Mini 7). What I also noticed is that there is an extra WiFi network appearing with a long...
I have a weird issue - I have 2 ISPs that I want to use for failover. I set WAN and LAN1 interfaces for Dual WAN but my LAN1 basically doesn't work - it shows "Your ISP's DHCP does not function properly" error. I can switch ISPs around and each of ...
Fellow Zen WiFi Pro ET12 users, just wanted to ask how many of you are successfully using the latest firmware version for your routers/nodes and what firmware version is that?Reason for my question is I and many others had a really bad headache earli...
The main node in my setup is broadcasting 6ghz but the satellite node is not. I’ve found a thread here that explains how to fix that issue (by reverting the firmware to an older version), but it also mentions that everyone has the satellite node hard...
Hello everyone,I have 1Gbps fiber connected to an AiMesh setup, GT-AX11000 Pro downstairs and RT-AC86U upstairs, they're connected through wired backhaul.I want to add another node outside in the shed, but it's impossible to drag a cable there.What's...
The new firmware very slightly improved router to mesh node 6GHz front and backhaul stability. It also slightly degraded 6GHz client to node and client to main router communications. Since I have been reliably using 6GHz client communication with me...
As the title says. The port just seemed to suddenly stop working. I use a spectrum modem and have so for a couple years and now suddenly the WAN port just stopped. I can connect the modem to other LAN ports and give internet access to my other hardwi...
Hey All,This is for the WAN side, not LAN side QOS.Just got a ZenWifi BT10 to move to Wifi 7. I've been using my existing XT12 perfectly well direct to the ISP with a PPPoE connection. The PPPoE connection requires a specific VLAN but, I that option ...
So about a year ago, I setup an Asus Zenfi AX router with Proton VPN installed on itEverything worked fine for almost a year, and then about a month ago I started running into connection issuesSo I looked at everything and it seemed the VPN certifica...
