This widget could not be displayed.
This widget could not be displayed.
cancel
Showing results for 
Search instead for 
Did you mean: 

ASUS ROG 3 - Wifi Connection Issue

Nanoo
Star II
Just now an update released, after the update wifi is not working in High bandwidth, but 2.4G band is working fine form my router.
The exact problem is when I connect in High bandwidth connection, it connects for some seconds and then it disconnects, it's going on in a loop. Then wifi connection scanning phase is hanging afterwards. Right now I have connected in 2.4G band, it's working fine.
Note: When I bought the phone in factory settings, faced the same issue. After the updates, it was fine. But after the version 17.0823.2009.99 , it's reverted and it's worse than before.
10 REPLIES 10

xihe
Rising Star II
What do you mean high bandwidth?

Nanoo
Star II
xihe

What do you mean high bandwidth?


View post
The 2.4 GHz band provides coverage at a longer range but transmits data at slower speeds. The 5 GHz band provides less coverage but transmits data at faster speeds.

xihe
Rising Star II
Nanoo

https://zentalk.asus.com/en/discussion/comment/129735#Comment_129735

The 2.4 GHz band provides coverage at a longer range but transmits data at slower speeds. The 5 GHz band provides less coverage but transmits data at faster speeds.


View post
Do you have other devices connected fine to the 5ghz WiFi band?

Nanoo
Star II
xihe

https://zentalk.asus.com/en/discussion/comment/129736#Comment_129736

Do you have other devices connected fine to the 5ghz WiFi band?


View post
Other device (TV, Laptop and other phones) are working fine in both Bands. It's only ROG 3's issue.
Before the update It was working fine.
Note: After the update 17.0823.2009.99, this issue occurred.