05-19-2026 09:55 AM - edited 05-19-2026 09:58 AM
Hi Guys,
Have a 3 floor home which is completely automated. All the automation is connected to TP Link access points which are plugged into my Asus mesh system. Having a lot of issues so the automation guys suggested having a separate network dedicated to the automation.
Issue is that I have only one ethernet cable system running between terrace to second to first to ground floor and this was being used as a wired backhaul for my Asus mesh system.
Now, if I use that existing cabling to connect switches on each floor and then plug in my asus system to the switches and also add a TP Link router to the system which along with the TP link APs will also plug into the switches to result in a system as shown in the image, will
1. The Asus mesh network work as before?
2. Will I be able to keep the TP link and Asus systems completely separated with different IP addresses etc?
Total newbie to networking so really will appreciate any help here.
05-21-2026 03:29 AM
Hi
Here is a daft idea...
IF you could live with a speed of 100 mbs for parts of your network...
123 and 6 conductor wires give 100 mbs, therefore it is possible to split the 8 conductor wires and have 2 sets of 100 mbs.
So by connecting 4 conductors from the first cable to 4 conductors of the second cable,you would have a 100 mbs connection from the terrace to the furthermost switch. AND a connection of 100 mbs between the upper and lower switches, giving some reduncancy.
I am aware of broadcast storms, but hopefully that will not occur.
Totally daft idea.