[NUC] Guide to Enable POST (Power On Self-Test) Function Hotkeys on NUCs
If the prompts showing the keys to press to enter the BIOS setup, Boot Menu, or Network Boot are shown, try the following:
For NUCs with Visual BIOS | For NUCs with Aptio V BIOS |
- Press F2 during the power on process.
- Enter the BIOS setup
- Go to Advanced > Boot > Boot Configuration.
- In the Boot Display Config pane:
- Enable POST Function Hotkeys Displayed
- Enable Display F2 to Enter Setup.
- Press F10 to save and exit BIOS.
| - Press F2 during the power on process.
- Enter the BIOS setup
- Go to Boot > Boot Display Configuration.
- Enable POST Function Hotkeys Displayed
- Enable Display F2 to Enter Setup.
- Press F10 to save and exit BIOS.
|