[LCD Monitor] ROG OLED Gaming Monitor Pixel cleaning process.
1. The default setting prompts users to clean pixels every 4 hours. Users can manually execute the cleaning process by navigating to the on-screen display (OSD) menu and pressing "OK."
2. Navigate through the OSD menu as follows: System setup -> Screen Protection -> Pixel Cleaning -> ON.
3. When the user manually turns off the monitor without removing the power cord, the monitor will automatically initiate pixel cleaning, taking approximately 6 minutes.
4. When the monitor enters standby mode after five minutes, it will start pixel cleaning, and its indicator light will behave in two ways:
A. When the power indicator light is on, after five minutes of entering standby mode, the ROG Logo will flash five times, then initiate pixel cleaning, lasting approximately 5-6 minutes. Upon completion, the ROG Logo will flash five times again.
B. When the power indicator light is off, after five minutes of entering standby mode, the monitor will automatically perform pixel cleaning. The ROG Logo will not flash, and it will remain in standby mode after completion.
ASUS recommends users to regularly perform pixel cleaning to ensure optimal performance of the OLED display.
