[Device Group] How to utilize Device Group for network policy settings - BRT Series
You can add multiple devices to a self-defined device group and assign the same network policy. It’s easier to manage multiple devices connected to your network by a Device Group, instead of specifying each device individually.
The following steps explain how to apply a custom device group network policy.
1. Adding a self-defined device group:
1.1 Go to Permission Management >> Device Group
1.2 Click Add Device Group 
to add your self-defined device group
1.3 Click Apply to confirm your settings
2. Add devices to your managed device list:
2.1 Go to Permission Management >> Devices
2.2 Click Add Device 
to add your device and designate the desired device group
2.3 Click Apply to confirm your settings
The following setting steps explain how to apply a custom device group network polices
1. After adding devices to a group, you can set up the following network polices for them:
1.1 Access Control - Time Scheduling
1.2 Firewall - App Patrol
1.3 Firewall - Web Content Filter
1.4 QoS - Bandwidth Limiter
Note: From the above example , each device inside a self-defined group can utilize upload and download speeds up to 10Mbps , provided there is sufficient WAN bandwidth.
How to get the (Utility / Firmware)?
You can download the latest drivers, software, firmware and user manuals in the ASUS Download Center.
If you need more information about the ASUS Download Center, please refer this link.
