[Computer Chassis] Prime AP303 Disassembly Instructions
Notice
1. Kindly wear gloves to protect your hands before proceeding with disassembly or assembly. Pay special attention to the corners of the parts to avoid any scratches.
2. When the side panel or front panel is made of glass, please handle it with extreme care during disassembly to avoid any collisions, falls, or undue stress.
3. When disassembling, please lay the casing flat on a stable surface to prevent the side panel from falling during the process.
4. Kindly ensure that the relevant wires are neatly arranged during assembly to prevent any damage to the wires throughout the process.
5. Keep track of all screws and small components during disassembly and assembly to avoid losing any parts.
Preparation
Phillips screwdriver PH2
Panels
Gently detach the panel from the panel clip, then lift to remove it.
Front Panel and Side Panel
Top Panel
Front I/O Module
*Preparation: Remove both side panels and the front panel. Unplug the cable headers and release the cable ties/management fasteners*
Unscrew the two screws on each side that secure the module, then carefully pull out the entire Front I/O module with its cables.
PSU Bracket
*Preparation: Remove left side and the front panels.
1. Remove the cable hiding board by unscrewing the two screws.
2. Unscrew the two screws at the front side of case, then lift the bracket to remove it.
Fan
Unscrew the four securing screws located at the four corners of the fan.
Feet
Remove the foot pad, then unscrew the securing screw located in the round hole.
If you need more information about our product, please visit ASUS official website.
