ASUS - ZenTalk

tfhoughton · 02-04-2025

I have a 3 node BE14000 system. Works well, but my house is spread out and I needed better coverage. Got a BD5 to help with that. It joined it to mesh with no problem. Tried to enable MLO to see if that would help even more. But MLO was not recognize...

tfhoughton · 01-26-2025

I have a 3 node BE14000 mesh. A Ring cam disconnects/reconnects frequently. In my previous Linksys setup I had a Linksys Velop node closer to the cam and it solved the problem. Thinking about adding a BD4 or BD5 to the exisitng BE14000 mesh.Any issue...

tfhoughton · 01-03-2025

Just got a BE14000 3 node mesh to replace an aging Linksys system. Working well so far....with 2 items I need to address:1. Range is not what I expected, but that it not the topic of this item.2. The System Log shows errors:Jan 3 15:28:54 roamast: [E...

tfhoughton

@jzchen Your screenshot makes sense. Both of the MLO "supported" devices each have 2.4, 5 and 6GHz channels. The "unsupported" devices only have 2.4 and 5. Same MLO situation as my configuration..."Supported" BE14000s have 2.4, 5, and 6. "Unsupported...

tfhoughton

The good news: I added a BD5 to a BE14000 system. It connected using the 5GHz band with no problem and connects with a good signal. I hope that helps.Not so good news: If you plan on using MLO with the BD5 ....the BD5 only supports MLO with other BD5...

tfhoughton

The BD5 can be added without changing any settings on the BE14000 - that's the good news. The bad news, as I was just told, is that the BD5 only supports MLO with other BD5s. That is very disappointing. I got the BE14000s and the BD5 to future proof ...

tfhoughton

Interesting. I researched the vaious options to extend the WiFi 7 net that is based on the BE14000s. I could not find any reference to BD5 MLO support being limited to a BD5. Seems like a design flaw. What are my options to have MLO support for the ...

tfhoughton · 02-07-2025

jzchen, thanks for all of the advice. I checked those options....No luck!Was thinking that BD5 only supports MLO with only BD5 nodes. Is that the case? I would hope it is not.Any other responses would be welcomed. I did provide a BD5 review, prompted...

ASUS - ZenTalk

User Statistics

User Activity

Does the ZenWiFi BD5 support MLO?

Will a BD4 or BD5 serve as a good extension to a BE14000/BT8 Mesh?

ZenWiFi BE14000 Mesh Syslog error messages

Re: ASUS ZenWiFi BD4 along-side ZTE 5G (three) router

Re: ASUS ZenWiFi BD4 along-side ZTE 5G (three) router

Re: Does the ZenWiFi BD5 support MLO?

Re: Does the ZenWiFi BD5 support MLO?

Re: Does the ZenWiFi BD5 support MLO?