如何在Z170 WS組NVMe RAID?

[FAQBot]

如何在Z170 WS組NVMe RAID?

A: 在組NVme RAID前需要確認以下項目:

1. 須為相同廠牌
2. 須為相同form factor(PCIE介面不支援)
3. 詳細PCIE SSD支援的device請參考Z170 WS QVL

http://dlcdnet.asus.com/pub/ASUS/mb/socket1151/Z170-WS/QVL/20151020_Z170-WS_Device_QVL.pdf

B: Device可以使用以下方式組建NVMe RAID

→[M.2x4_1] + [M.2x4_2]

→[M.2x4_1 + Hyper kit+ NVMe SSD] + [U.2]

→[M.2x4_1 + Hyper kit+ NVMe SSD] + [M.2x4_2 + Hyper kit+ NVMe SSD]

C: Device安裝好後,開機進入BIOS, 相關設定以及選項請參考以下:

Intel 750 series  2.5in  NVME SSD

1. Boot>> CSM (Disabled)
2. Advanced>>SATA Mode selection>>RAID
3. Advanced>>PCH Storage Configuration>>M.2x4_1 Hyper kit Mode (Enabled)、 M.2x4_2 Hyper kit Mode (Enabled) 或 U.2(Enabled)
4. Advanced>>PCH Storage Configuration>>M.2x4_1 PCIE Storage Raid Support (Enabled)、M.2x4_2 PCIE Storage Raid Support (Enabled)
5. Advanced>>Intel(R)Rapid Storage Technology>>開始選擇要建Raid的磁碟和模式!!

Samsung 950 pro  M.2  NVME SSD

1.Boot>> CSM (Disabled)

2.Advanced>>SATA Mode selection>>RAID

3.Advanced>>PCH Storage Configuration>>M.2x4_1 PCIE Storage Raid Support (Enabled)、M.2x4_2 PCIE Storage Raid Support (Enabled)

4.Advanced>>Intel(R)Rapid Storage Technology>>開始選擇要建Raid的磁碟和模式!!