ASUS - ZenTalk

acastleberry · 11-15-2024

Hi all...hoping someone might have seen this issue before or have some ideas. I am struggling with this:I have 3 Asus ET12 Pro devices set up in AiMesh using wired backhaul. Main router was connected to 2 additional nodes via 1G LAN ports. Everything...

acastleberry

They are most certainly VLANs...that's why they get an IP in a different subnet than the main SSID.

acastleberry

I am the original poster.When you configure IoT and Guest network on the ET12, it does create another VLAN, though you cannot see or manage that VLAN information in 3.x.x.x.x software. If you are using wireless backhaul (or wired backhaul with nodes...

acastleberry

1. You can't use an unmanaged switch with VLANs.2. The clients not connecting doesn't have anything to do with RSSI. It has everything to do with how Asus handles VLANs between guest networks. If the mesh nodes can't reach the main router over a ...

acastleberry · 11-18-2024

Okay, I was missing something simple...when I set up the 2 additional SSIDs/VLANs, I did not notice that my 2 nodes were offline (rebooting). So when I set saved the config, it was only applied to the main router. I went back to the Guest Network P...

acastleberry · 11-18-2024

The document you linked is how my devices are connected in Scenario 2. I have the main router connected to the switch on the 2.5G LAN port. The switch then connects to the other 2 nodes on their 2.5G WAN ports. So I'm using 3 switchports to connec...

ASUS - ZenTalk

User Statistics

User Activity

Problem with guest networks and using a switch

Re: Problem with guest networks and using a switch

Re: Problem with guest networks and using a switch

Re: Problem with guest networks and using a switch

Re: Problem with guest networks and using a switch

Re: Problem with guest networks and using a switch