不能顯示該小工具。
不能顯示該小工具。
取消
顯示結果 
搜尋替代 
您的意思是: 

RT-AC66U B1 一直斷線

krisinhusky
Star I
型號: RT-AC66U B1
韌體版本:3.0.0.4.385_20632
問題現象:今天開始線上遊戲不時斷開伺服器,看了系統記錄 - 一般記錄檔如下,有驚嘆號寫幫我改成自動IP(本來就自動),重開後沒了,但APCS_CSTIMER還是一直跳處來,請問這要怎麼設定才好?

Oct 2 18:46:44 acsd: selected channel spec: 0x1005 (5)
Oct 2 18:46:44 acsd: Adjusted channel spec: 0x1005 (5)
Oct 2 18:46:44 acsd: selected channel spec: 0x1005 (5)
Oct 2 18:46:44 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMER
Oct 2 18:46:45 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 18:46:45 acsd: Adjusted channel spec: 0xe09b (149/80)
Oct 2 18:46:45 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 18:46:45 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_CSTIMER
Oct 2 19:00:55 disk_monitor: Got SIGALRM...
Oct 2 19:01:48 acsd: selected channel spec: 0x1005 (5)
Oct 2 19:01:48 acsd: Adjusted channel spec: 0x1005 (5)
Oct 2 19:01:48 acsd: selected channel spec: 0x1005 (5)
Oct 2 19:01:48 acsd: acs_set_chspec: 0x1005 (5) for reason APCS_CSTIMER
Oct 2 19:01:49 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 19:01:49 acsd: Adjusted channel spec: 0xe09b (149/80)
Oct 2 19:01:49 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 19:01:49 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_CSTIMER
Oct 2 19:16:52 acsd: selected channel spec: 0x100a (10)
Oct 2 19:16:52 acsd: Adjusted channel spec: 0x100a (10)
Oct 2 19:16:52 acsd: selected channel spec: 0x100a (10)
Oct 2 19:16:52 acsd: acs_set_chspec: 0x100a (10) for reason APCS_CSTIMER
Oct 2 19:16:53 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 19:16:53 acsd: Adjusted channel spec: 0xe09b (149/80)
Oct 2 19:16:53 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 19:16:53 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_CSTIMER
Oct 2 19:31:56 acsd: selected channel spec: 0x1002 (2)
Oct 2 19:31:56 acsd: Adjusted channel spec: 0x1002 (2)
Oct 2 19:31:56 acsd: selected channel spec: 0x1002 (2)
Oct 2 19:31:56 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_CSTIMER
Oct 2 19:31:58 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 19:31:58 acsd: Adjusted channel spec: 0xe09b (149/80)
Oct 2 19:31:58 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 19:31:58 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_CSTIMER
Oct 2 19:47:00 acsd: selected channel spec: 0x1003 (3)
Oct 2 19:47:00 acsd: Adjusted channel spec: 0x1003 (3)
Oct 2 19:47:00 acsd: selected channel spec: 0x1003 (3)
Oct 2 19:47:00 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMER
Oct 2 19:47:02 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 19:47:02 acsd: Adjusted channel spec: 0xe09b (149/80)
Oct 2 19:47:02 acsd: selected channel spec: 0xe09b (149/80)
Oct 2 19:47:02 acsd: acs_set_chspec: 0xe09b (149/80) for reason APCS_CSTIMER
Oct 2 19:48:10 syslog: WLCEVENTD wlceventd_proc_event(500): eth1: Auth 84:C7:EA:8D:01:52, status: Successful (0)
Oct 2 19:48:10 syslog: WLCEVENTD wlceventd_proc_event(529): eth1: Assoc 84:C7:EA:8D:01:52, status: Successful (0)
Oct 2 19:49:17 syslog: WLCEVENTD wlceventd_proc_event(466): eth1: Deauth_ind 84:C7:EA:8D:01:52, status: 0, reason: Deauthenticated because sending station is leaving (or has left) IBSS or ESS (3)
Oct 2 19:49:17 syslog: WLCEVENTD wlceventd_proc_event(466): eth1: Deauth_ind 84:C7:EA:8D:01:52, status: 0, reason: Class 3 frame received from nonassociated station (7)
Oct 2 19:49:17 syslog: WLCEVENTD wlceventd_proc_event(500): eth2: Auth 84:C7:EA:8D:01:52, status: Successful (0)
Oct 2 19:49:17 syslog: WLCEVENTD wlceventd_proc_event(529): eth2: Assoc 84:C7:EA:8D:01:52, status: Successful (0)
Oct 2 20:02:05 acsd: selected channel spec: 0x1002 (2)
Oct 2 20:02:05 acsd: Adjusted channel spec: 0x1002 (2)
Oct 2 20:02:05 acsd: selected channel spec: 0x1002 (2)
Oct 2 20:02:05 acsd: acs_set_chspec: 0x1002 (2) for reason APCS_CSTIMER
Oct 2 20:17:08 acsd: selected channel spec: 0x1003 (3)
Oct 2 20:17:08 acsd: Adjusted channel spec: 0x1003 (3)
Oct 2 20:17:08 acsd: selected channel spec: 0x1003 (3)
Oct 2 20:17:08 acsd: acs_set_chspec: 0x1003 (3) for reason APCS_CSTIMER
1則回覆 1

AL_ASUS
Rising Star II
HI 克里辛赫斯基 您好
請問您目前使用上還有一直發生此狀況嗎?
您可嘗試在更新韌體版本(官方最新版本 3.0.0.4.385.20633)
再麻煩 謝謝