For no power, no display, abnormal color or abnormal display issues, please reconnect the cable with the source device and reboot the projector again.
If necessary, reset the projector to default settings. Please refer to the FAQ below for further troubleshooting scenarios.
Projector E1Z FAQ
What to do if the projector shows blurred and hazy images?
What to do if lens of my projector is dirty?
Power of projector can’t be turned on
Projector is powered on but displays no image/ image freezes
The projected image looks like trapezoid or tilted to one side.
My projector image is upside down.
The projected screen corner is blurrier than the middle.
The unit can’t project by using VGA cable on MacBook Air
The device is powered on but shows no image, no video or it will automatically turn off in a few min...
The device is powered on but the projected color or display is abnormal, what should I do?
How do I see my power point documents if I get error unsupported file or images are missing
How to reset the unit to default setting
If above FAQs didn't solve your problem, or didn't address the issue you're having, please contact local technique support center or service center for further assistance.