I have a 98 Pro hardwired to the Ax11000..want to have same routers in mesh mode. Just wondering which setup would be the best. (2)98 Pro's or (2) bq16's?
After installing this update, the BE96U node curiously began working in MLO on the 5GHz and 6GHz bands, with the GT-BE98 Pro main and the GT-BE98 Pro node also using all bands - until instability beg...
Hi, I am running RT-AX86U, with latest firmware version: 3.0.0.4.388_24401 (stock firmware) My DHCP is set to allow IP Pool address range: 192.168.50.10 - 192.168.50.60 However, l...
I am hoping someone has some insight on this. I have an ASUS RT-BE96U. I have my NAS connected off the second 10Gb port on the back of the router by itself. Everything else is running off a switch co...
Our BE88u takes ~50 seconds to load the admin page. Each new admin page is likewise very slow to load. Tried both my main computer (ethernet) and laptop (ethernet). We're getting ~1000/100 speeds ...
This evening I turned off all MLO. It had always appeared MLO downhaul was working well between the main and the node. I already knew MLO fronthaul was a problem and have had it turned off for ...
I want to add something outside, and it is used to manage security cameras, pool switches (Alexa controlled), which are 30-50m away from the main building (no need to have high data volume...
I have a BE14000 3 node mesh with a BD5. Just upgraded to the latest FW.....58234 on the BE14000s.....Several devices especially Roku fail to connect to the main network SSID - WiFi 7 enabled. I hard...
Since I have four of these sitting unused due the the May 2025 firmware update that eliminated 6e wireless client broadcasting for nodes, I decided to see if there was a new update. Sure enough, they...