Make the notch hiding corner rounded

ZF Model: ZB630KL
RAM: 4G
Firmware/APP Version: WW-16.2017.1905.065
Frequency of Occurrence: Always
Rooted: No
APP Name: Notch corner
Last edited by muttakinbiswas on 2019/7/10 23:29
As you can see in the picture, the black bar hiding the notch.
First of all i don't want it hidden. After pie update this happening auto. There's no option to off that hide.
Then the two side of the black bar which is hiding my notoch isn't rounded like the bottom of my screen. And it seems really awkward. So, asking to make rounded corner to the notch black bar which is hiding the notch.
Also the bottom corners also not perfectly rounded. Need fix on this. See the picture i attached, I've marked the places.
RAM: 4G
Firmware/APP Version: WW-16.2017.1905.065
Frequency of Occurrence: Always
Rooted: No
APP Name: Notch corner
Last edited by muttakinbiswas on 2019/7/10 23:29
As you can see in the picture, the black bar hiding the notch.
First of all i don't want it hidden. After pie update this happening auto. There's no option to off that hide.
Then the two side of the black bar which is hiding my notoch isn't rounded like the bottom of my screen. And it seems really awkward. So, asking to make rounded corner to the notch black bar which is hiding the notch.
Also the bottom corners also not perfectly rounded. Need fix on this. See the picture i attached, I've marked the places.
0
This discussion has been closed.
Comments
And another issue is bottom corners are not rounded perfectly.
You've marked the wrong places at the top. They should be at the end of the notch.The black borders isn't properly aligned with the display. It's a hardware defect. That's why it is making the corners of the notch and bottom display corners not perfectly rounded. The 066 update does solves that issue. But it vanishes when the device is rotated to landscape mode.
Do you install third party Notch corner app?
Have you tried it under "safe mode"?
In safe mode, only the factory pre-installed applications will be loaded.
For instructions, please refer to the link below:
http://www.asus.com/zentalk/forum.php?mod=viewthread&tid=3105&highlight=safe+mode
Please help to confirm, thank you:)